Ford X-Flow

Ford X Flow/RX8 adapter 
This adapter plate was designed to bolt a Ford X Flow engine to an rx8 gearbox using as many of the engines standard parts as possible. It utilizes the engines original engines sump/flywheel and clutch aslong as it is a 23 spline ford unit used with the ford type 9 5 speed gearbox . You will need to use a LRS100 starter motor from a x flow. 
In most cases it is possible to use the rx8 clutch arm slave cylinder and release bearing with very little work, but In some cases the clutch arm pivot point height might need adjusting to suit.  We recomend mocking this up out of the car. The bolt pitch tapped in the adapter plate is M10x1.5mm. Spigot bearing RX8017 is to be used with this adapter.
 
Tested in motorsport to ensure we offer the most reliable adapter plate on the market.
 
Adapter plates are normally in stock and are sent out next working day via a 48hour courier. We offer free uk mainland delivery but delivery to islands and outside of the uk mainland with be chargable. If the item is out of stock there my be delays but we try our best to inform the customer as soon as we can if that is the case.  Only for use in motorsport or closed circuit racing.