top of page
Ford focus 5CYL/volvo white block

Ford focus 5CYL/volvo white block

Ford focus ST/RS 5CYL/Volvo whiteblock/RX8 adapter

This adapter plate was designed to bolt a Ford Focus ST/RS 5cyl engine to an rx8 gearbox using as many of the fords engines standard parts as possible. It utilizes the ford focus st engines original flywheel and clutch pressure plate along with a 23 spline ford clutch friction plate. The gearbox bellhousing will need to geound out to clear the crank sensor on top ans to clear the starter motor nose.

In most cases it is possible to use the rx8 clutch arm slave cylinder and release bearing with very little work, but In some cases the clutch arm pivot point height might need adjusting to suit. We recomend mocking this up outside of the car. The bolt pitch tapped in the adapter plate is M10x1.5mm. Spigot bearing RX8017 is to be used with this adapter.

 

Tested in motorsport to ensure we offer the most reliable adapter plate on the market.

 

Adapter plates are normally in stock and are sent out next working day via a 48hour courier. If the item is out of stock there my be delays but we try our best to inform the customer as soon as we can if that is the case. Only for use in motorsport or closed circuit racing.

    £120.00Price
    Product Page: Stores_Product_Widget
    bottom of page