Ford Ecoboost 2.0l/2.3l
Ford Ecoboost 2.0l/2.3l/RX8 adapter
This adapter plate was designed to bolt a Ford Ecoboost 2.0l/2.3l engine to an rx8 gearbox using as many of the engines standard parts as possible. We haven’t tested out any flywheel or clutch combos for this application as of yet but we would imagine flywheel/clutch pressure plate along with a 23 spline ford clutch friction plate should work. You will also need to grind out the inside of the bellhousing for the starter motor to clear it.
In most cases it is possible to use the rx8 clutch arm slave cylinder and release bearing with very little work, but In some cases the clutch arm pivot point height might need adjusting to suit. We recomend mocking this up out of the car. The bolt pitch tapped in the adapter plate is M10x1.5mm. Spigot bearing RX8017 is to be used with this adapter.
Tested in motorsport to ensure we offer the most reliable adapter plate on the market.
Adapter plates are normally in stock and are sent out next working day via a 48hour courier. If the item is out of stock there my be delays but we try our best to inform the customer as soon as we can if that is the case. Only for use in motorsport or closed circuit racing.