top of page
Ford Duratec 2.0l/2.3l

Ford Duratec 2.0l/2.3l

Ford Duratec 2.0l/2.3l/RX8 adapter

This adapter plate was designed to bolt a Ford Duratec 2.0l/2.3l engine to an rx8 gearbox using as many of the engines standard parts as possible. It utilizes the Ford Fiesta ST150 flywheel/clutch pressure plate along with a 23 spline ford clutch friction plate. You will need to grind out the inside of the bellhousing for the starter motor to clear it.

In most cases it is possible to use the rx8 clutch arm slave cylinder and release bearing with very little work, but In some cases the clutch arm pivot point height might need adjusting to suit. We recomend mocking this up out of the car. The bolt pitch tapped in the adapter plate is M10x1.5mm


Tested on road and in motorsport to ensure we offer the most reliable adapter plate on the market.


Adapter plates are normally in stock and are sent out next working day via a 48hour courier. If the item is out of stock there my be delays but we try our best to inform the customer as soon as we can if that is the case.

    Product Page: Stores_Product_Widget
    bottom of page